Heavy Duty Cleaner Degreaser

When only the strongest cleaner will do! A favourite with contractors on a tight schedule and a tighter budget. HDC is powerful, yet versatile, safe and effective.

Suitable Substrates

 Magic Bullet’s ‘Heavy Duty Cleaner Degreaser’ has been designed for use on heavily contaminated brick, stone, concrete, cement and similar hard surfaces. Works well on vertical surfaces but is particularly effective on floors as a replacement for acids or strongly corrosive cleaners.Can be used as a stand-alone cleaner or as a preparation tool prior to painting.Non-corrosive to most surfaces. Do not use neat on aluminium.

Application

Apply the product liberally – 5 to 15 m² per lt. A low pressure hand spray is recommended – particularly for vertical surfaces.  Allow the product to work for 1 to 2 minutes on light soiling and 10 to 15 minutes on heavy soiling. Whilst still wet thoroughly rinse off, ideally with a warm water pressure washer to achieve best results. Larger floors should then be wet vacuumed. Stubborn or deep staining may require a second application.

 Dilution – For heavily contaminated areas such as old factory floors use neat. For lighter contamination such as a dirty kitchen floor dilute 1 part HDC up to 10 parts clean water.

Trial application

As with all our products we strongly recommend you carry out a small discrete sample application to test the suitability of our Heavy Duty Cleaner Degreaser for your particular use.

 Please refer to the relevant Product Health and Safety data sheet prior to any use.